China four head dsp 1325 atc cnc router machine for wood

Introduction

Payment term:100% T/T or 50% T/T advance, 50% T/T before shipment

Delivery time: 12-15 working days after payment

China dsp 1325 cnc router Details are as follows

1. Adopt gantry type high rigid structure;

2. The whole machine adopts rectangular tube welding, annealing and stress removal heat treatment after finishing; Stable without deformation;

3. The table is not moving and the gantry frame is moving.

4. Double motor drive adopts double motor synchronous drive in the direction of X axis, so that the driving force is multiplied, and it is easy to ensure the perpendicularity of X axis and Y axis

1.it’s for wood cnc adopts the new generation bus control system, Yaskawa servo motor and drive from Japan, fast speed, high efficiency, Italy imported HSD air-cooled automatic tool change spindle, Taiwan inverter.

2. This machine adopts cylinder type tool library, different tools are installed on different spindles, the control system spindles can be automatically replaced, processing different object patterns, and equipped with automatic tool sensor calibration.

3. The machine is equipped with automatic pushing function, which can be connected with automatic loading and unloading platform, reducing labor cost and saving loading and unloading time.

4. The function of intelligent processing crossing the boundary protection can prevent excessive processing caused by mechanical collision.

5. Imported lead screw guide rail, precision bevel rack

Using Taiwan precision helical rack, reduce the reverse gap between teeth, reduce the noise of the machine, ensure the machining accuracy of the machine;

Imported 25mm linear guide rails are adopted for all three axis. We only use STAR, PMI and other linear guides with the best quality. Although these high-quality components cost more than other components, their excellent quality is the only way to achieve the high accuracy and long life that users require.

Double support ball screw, Z axis ball screw at both ends using a set of back-to-back angular contact thrust ball bearings for support. After testing, ensure 100% parallel to the guide rail.

7. Automatic tool block: automatic detection tool length, fast setting material zero plane, high speed, high torque, high precision spindle drive system

8. The spindle drive adopts imported Italian HSD 3HP variable frequency spindle, 18000RPM.

9. High-speed chuck and high-speed nut by dynamic balance, using high-speed chuck and high-speed nut, suitable for high-speed processing, after strict dynamic balance, to meet the requirements of high speed.

10. Tow chain system: Using German IGUS flexible cable and tow chain, obviously with ordinary cable and tow chain cost is much higher. But it can guarantee the reliability of the machine. Machine tools are in motion all the time, the cable is repeatedly tortuous, the use of general ordinary cable is very easy to be broken, there will be inexplicable failure, and very difficult to maintain. We use a fully enclosed towing chain system to ensure the absolute safety of the cable.

11. Four zone vacuum table, vacuum adsorption table greatly improve the work efficiency; And each section can be individually controlled, using special materials made of seals, can be waterproof and oil proof.

Application

Technical parameters

Parts show (Use on machine)

Optional

Samples

Shipment

Packaging Details:

1. Outside package: Standard export free fumigation wooden box.
2. inner package: Moisture-proof and rust-proof elastic plastic film packaging
3. Our factory colleagues can package as your requests too.

Warranty and after-sell service

contact us